Skip to main content

RAID and Hot Swap Drives

Yesterday morning we got a defunct drive on our main Domino server. No problem, I called IBM and they arranged to send out a replacement drive within 4 hours. We got the drive within about 3. (Good Job).

I mentioned to my boss that although the drive was a hot-swap drive, there was a chance, however slight, that it could bring the server down. This is my standard disclaimer nowadays.

Well, I removed the old drive and waited about 30 seconds before plugging in the new one.

Instead of the expected rebuild operation, the RAID controller flagged the new drive as defunct and Windows Server 2003 obliged by giving me a blue screen of death.

Great...

I had a look at the packaging that IBM sent... Reconditioned Drives... not good.

I don't begrudge IBM for using reconditioned parts but I think it is a little bit cheeky.

At Any rate, following a call to IBM was told to update the firmware on the drives as the replacement drive have shipped with the very latest. Isn't that just a typical IBM response. When in doubt, update the firmware.

I had to schedule an outage and this morning I upgraded the firmware.

Did it work?

Nope. We're still in the poo.

Maybe we'll get a chance to try out our DRP after all.

Update....
I've just gotten off the phone to an IBM tech. He said that sometimes they use other brand drives and rebadge them as IBM. He asked me to check the drive.

I took it out, turned it upside down etc. and looked at the circuit board. Maxtor. The IBM tech said that it was ok for Maxtor and that it was Fujitsu that we had to worry about. (whatever?).

Anyway, I plugged the drive back and... it immediately started rebuilding.

Now, I'd plugged and unplugged the drive before and after the firmware update. The difference was that this time, I'd turned the drive upside down to read a label.

I guess those drives need a little shake before installation.

And I'll be extra-diligent on the backup until I trust the drive, that's for sure.

Comments

Popular posts from this blog

How to Change Your Notification Options for New Lotus Notes Mail in version 8.x

Don't worry, I'm not patronizing you (my readers), I just decided to re-document this for one of our internal users and thought you might want to be able to use it in your own user documentation. WHAT IS THIS DOCUMENT ABOUT? Some people who don't get a lot of mail, like to be notified when such an event occurs. Notification can be; via a sound via a pop-up box via the system tray (where the computer clock is) The pop up box looks like this; Other people, who like myself, get too much mail would rather not be notified. The aim of this document is to tell you how (and where) to turn these options on and off. CHANGING YOUR SETTINGS To change your settings from the Notes 8.x client; On the Menu, click File , then Preferences... On the left hand side , click on the little plus sign to the left of Mail to expand the options. Click on the option marked Sending and Receiving . In the middle section, under receiving, you can control your notifications. If you untick the box mark

How to Create an Auto-Response Mail Message in Lotus Notes 8.5.3+

Why would you do this? Suppose that you have an externally accessible generic email address for your company; support@mycompany.com or info@mycompany.com. You might expose this to the web and allow people to send messages to you. Setting up an auto-response email will tell the senders that their message reached its destination and that it will be dealt with accordingly.  It's also good practice to include links to FAQs or other useful information. Why 8.5.3 The techniques we'll be using here work in older versions of Notes but some of the options seem to have moved around in 8.5.3.  I figured it was a good time to show you where they've moved to. The Procedure Start Domino Designer and open the Mail file to be modified.  A really quick way to do this is to right-click on the application tab and choose "Open in Designer". In the Left hand panel of designer, expand Code and then double-click Agents.  A new window should appear. Click the action

How to Do a Mail Merge to Email using Lotus Notes

Why do one? In today's "green" world, it makes much better sense to send out emails than letters but you still want to personalize them. Sadly, by itself Lotus Notes doesn't support mail merge to email. Of course, we know that outlook does (but then it lets anyone and anything send emails for you - even when you don't want them to). So, how to do it in Notes? OpenNTF The first port of call is OpenNTF ( http://www.openntf.org/ ). This place is full of great things but most of them are really badly documented. Still, these guys give things away for free and they develop in their spare time, so we should be grateful for what we get. There's a great little project there called MailMerge Excel to Notes . Go there, click on releases and download the ZIP file. Getting to the Code The installation is tricky though I've noted that since I asked the author about the install, it's been updated (so maybe these steps are less necessary). Unzip the files to somewher